Description
The Harvest Duke Active Mattress is a high-quality replacement mattress by Harvest Healthcare.
Designed for the frailer person who could be vulnerable to developing pressure ulcers, the system provides a very high degree of pressure relief whilst protecting the person. For use by patients at very high-risk of developing pressure ulcers, and supports the treatment of up to stage 4 pressure ulcers.
The mattress has 30 individual cells: 25 alternating air cells and 5 static pillow section cells. All air cells are individually replaceable should any damage occur.
A 50mm integral foam base rests beneath the removable cell structure, providing more support and redistributes pressure where necessary. The two structures are separated by a water resistant, PU cover – enabling both compartments to be removed for decontamination purposes.
The welded seams of the cover also prevent water ingress, and further protect the inner structure of the mattress system. The cover has a Crib 5 fire rating.
It is compatible with Harvest pumps 2 and 3.
Maximum Patient Weights:
- Harvest 2 Pump: 26 Stone / 165kg
- Harvest 3 Pump: 39 Stone / 247kg
Purchase this mattress alone or with one of the compatible pumps.
Specifications
The Duke Active Mattress complies with Bed Rail Regulations for the Woburn, Woburn Low, Community and Community Low beds.
Dimensions: 1980 x 900 x 140mm
Number of cells: 30
Pressure Risk: Very high
Mattress Weight: 9kg
Harvest Duke Active Mattress Features
- 30 independent cells provides more comfort and support
- Alternating pressure relief distributes the body weight of the service user to provide treatment for pressure ulcers
- Pillow section for patient stability
- All cells interchangeable for ease of repair and cleaning
- 4-way stretch welded PU cover which is vapour permeable, welded, water resistant and has a Crib 5 fire rating
- The PU resists water to make the cells easier to clean
- Substantial pressure relief for service users
- Compatible with Harvest 2 and Harvest 3 pumps
- Cable management system
HWB Mobility are proud to partner with Harvest Healthcare to bring you a wide range of pressure care equipment including static mattresses, mattress overlays and cushions as well as profiling beds and moving and handling equipment.
Mattress Pumps
The Duke Active Mattress is compatible with Harvest Healthcare’s Pumps 2 and 3. Take a look at the chart below for a comparison.
Harvest Pump 2
The Harvest 2 is Harvest Healthcare’s digital pump.
It is ideal for use in community and care home settings as it is easy to use.
It has a power failure alarm, L.E.D display, lock-out mode and static mode.
Compatible with all of our active overlays and replacement mattresses.
Specifications
Code: HPU2
Dimensions: 130 x 140 x 270mm
Weight: 1.7kg
Voltage: 230v / 50Hz
Cycle Time: 10 Minutes
Pressure Range: 30-80 mmHg
Fuse: T1A 250v
Electrical Safety Standards: EN60601-1:2006 and A11:2011
Harvest Pump 3
The Harvest 3 is Harvest Healthcare’s high-end digital pump.
It is ideal for use in all settings including acute as it caters for bariatric products and more complicated clinical needs.
It is easy to use and features an L.E.D display, lock-out mode, static mode, maxi-firm mode and four cycle times. It also has visual and audible alarms for low pressure and power failure.
It has a very high capacity, fitting all our active mattresses including our bariatric range.
Specifications
Dimensions: 340 x 125 x 220mm
Weight: 3.5kg
Voltage: 230v / 50Hz
Cycle Times: 10/15/20/25 Minutes
Pressure Range: 30-70 mmHg
Fuse: T1A 250v
Electrical Safety Standards: EN60601-1:2006 and A11:2011
